✅ Authorized Fantech Partner in Egypt | Official Warranty Coverage | Expert PC Building Consultation Available
Fantech Zenith Pro WGP18 20 Button Hall Effect Black Bluetooth Wireless Gamepad
Fantech Zenith Pro WGP18 Black is a wireless multi-platform gamepad featuring Hall-Effect thumbsticks and triggers, tri-mode StrikeSpeed Wireless/Bluetooth 5.2/Wired connectivity, 20 full mechanical buttons with 14 programmable macros, a built-in gyro sensor for motion controls, an included charging dock, and an 800mAh rechargeable battery delivering up to 8 hours of gameplay. It is compatible with PC, Steam, Switch, Switch 2, iOS, macOS, tvOS, Android, Tesla vehicles, and cloud gaming services.
⚡ Engineering Highlights at a Glance:
- Hall-Effect Thumbsticks & Triggers: Magnetic sensing eliminates stick drift and delivers smooth, precise input for long-term reliability.
- Full Mechanical Buttons: Action buttons, D-pad, bumpers, triggers, and rear paddles all use mechanical switches for crisp, tactile response.
- Tri-Mode Connectivity: StrikeSpeed Wireless (1000Hz), Bluetooth 5.2 (125Hz), and wired USB-C for maximum platform flexibility.
- 14 Programmable Macro Buttons: Supports timed macro recording for automating complex combos and repetitive actions.
- Included Charging Dock: Drop-and-charge convenience keeps the controller powered and ready.
- Built-in Gyro Sensor: Motion-controlled aiming and gesture input in supported games.
- 800mAh Rechargeable Battery: Up to 8 hours of gameplay with approximately 2 hours charging time.
Who is the Fantech Zenith Pro WGP18 For?
Expert Advice & Setup Considerations
Hall-Effect Technology Explained
The Zenith Pro WGP18 uses Hall-Effect sensors for both thumbsticks and triggers. Unlike traditional potentiometer-based sticks that rely on physical contact and wear out over time, Hall-Effect sensors use magnetic fields to detect position. This eliminates stick drift, a common failure point in controllers after extended use. The result is consistent accuracy and a significantly longer lifespan.
📐 Connectivity and Platform Pairing
The Zenith Pro supports three connection modes: StrikeSpeed Wireless (2.4GHz via included USB receiver), Bluetooth 5.2, and wired USB-C. For competitive gaming, StrikeSpeed Wireless delivers a 1000Hz polling rate for near-instantaneous input detection. Bluetooth mode operates at 125Hz, suitable for casual and mobile gaming. For first-time pairing with a Switch console, use the wired USB-C connection to establish the initial link before switching to wireless.
🔩 Macro and Turbo Functions
The 14 programmable buttons support timed macro recording for automating complex combos or repetitive actions. The Turbo function allows any button to be set for rapid-fire input. Configuration is done via the Keylinker mobile app, which also handles lighting and vibration settings. The included charging dock provides drop-and-charge convenience—simply place the controller on the dock to begin charging without plugging in a cable.
المواصفات الفنية
| Model Name | Fantech Zenith Pro WGP18 |
| العلامات التجارية | Fantech |
| SKU / MPN | WGP18 |
| EAN / UPC | 6977052255938 |
| Color | Black |
| Connectivity | StrikeSpeed Wireless, Bluetooth 5.2, Wired USB-C |
| Number of Buttons | 20 (Full Mechanical) |
| Thumbstick Type | Hall-Effect (GINFULL) |
| Trigger Type | Hall-Effect (Mechanical) |
| Action Button Type | Mechanical |
| D-Pad Button Type | Mechanical |
| Bumper Button Type | Mechanical |
| Rear Paddle Button Type | Mechanical |
| Macro Buttons | 14 Programmable (Rear Paddles & System Buttons Excluded) |
| Polling Rate | 1000Hz (Wired/StrikeSpeed Wireless), 125Hz (Bluetooth) |
| Turbo | Yes |
| Rumble | Adjustable 4-Level Vibration |
| Motion Sensor | Built-in Gyroscope |
| Battery Capacity | 800mAh Li-ion |
| Battery Life | Up to 8 Hours |
| Charging Time | Approximately 2 Hours |
| Charging Dock | Yes (Included) |
| Dimensions | 158.5 x 103 x 63.9 mm |
| Weight | 240 ± 3g |
| Compatibility | PC, Steam, Switch, Switch 2, iOS, macOS, tvOS, Android, Tesla Vehicles, Cloud Gaming/Game Pass |
| Included in Box | ZENITH PRO WGP18, Charging Dock, USB-C Data Cable, USB-A Receiver, Warranty Card, Quick Start Guide, Greeting Card |
Expert Recommendation: Getting the Most from Your Zenith Pro WGP18
For competitive PC gaming, use the included StrikeSpeed Wireless receiver to take advantage of the 1000Hz polling rate for the lowest possible input latency. If you play on multiple platforms, pair via Bluetooth for Switch, mobile, and Tesla, and use the 2.4GHz receiver for PC. The included charging dock provides drop-and-charge convenience—place the controller on the dock after each session to keep it topped up. Before first use, charge the controller fully; the 800mAh battery delivers up to 8 hours of gameplay. Configure your 14 programmable macro buttons through the Keylinker mobile app. The full mechanical button set—including action buttons, D-pad, bumpers, triggers, and rear paddles—provides crisp, tactile feedback for precise input. For Switch users, hold the Home button to initiate pairing after initial USB-C connection.
Frequently Asked Questions
What platforms is the Fantech Zenith Pro WGP18 compatible with?
The Zenith Pro WGP18 is compatible with PC, Steam, Nintendo Switch, Switch 2, iOS, macOS, tvOS, Android, Tesla vehicles, and cloud gaming services including Game Pass. It uses tri-mode connectivity: StrikeSpeed Wireless, Bluetooth 5.2, and wired USB-C.
What are Hall-Effect thumbsticks and how do they prevent drift?
Hall-Effect sensors use magnetic fields to detect stick position instead of physical contact. Traditional potentiometer-based sticks wear out over time, causing drift. Hall-Effect sensors have no mechanical wear points, providing consistent, drift-free accuracy throughout the controller’s lifespan.
How long does the Zenith Pro WGP18 battery last and how long does it take to charge?
The built-in 800mAh Li-ion battery provides up to 8 hours of gameplay. Charging via the included dock or USB-C takes approximately 2 hours to reach full capacity.
What is the polling rate of the Zenith Pro WGP18?
The Zenith Pro WGP18 delivers a 1000Hz polling rate in both wired and StrikeSpeed Wireless modes, and 125Hz in Bluetooth mode. The high polling rate ensures every input is detected with minimal latency.
Does the Zenith Pro WGP18 have motion controls, vibration, and a charging dock?
Yes. The controller includes a built-in gyroscope for motion-controlled aiming, 4-level adjustable rumble vibration, and an included charging dock for drop-and-charge convenience. It also features full mechanical buttons throughout.
What is included in the box with the Zenith Pro WGP18?
The box includes the ZENITH PRO WGP18 controller, charging dock, USB-C data cable, USB-A receiver, warranty card, quick start guide, and a greeting card.












المراجعات
لا توجد مراجعات بعد.