The FSP 1000FP listing corresponds to FSP’s FP1000 line-interactive uninterruptible power supply. The official product information describes 1000 VA / 600 W capacity, automatic voltage regulation, simulated sine-wave output on battery, cold start, and automatic restart when mains power returns.
Key Features
- 1000 VA / 600 W rated capacity
- Boost and buck automatic voltage regulation
- Simulated sine-wave output in battery mode
- Cold-start function
- Automatic restart after AC power recovery
- Off-mode battery charging
المواصفات الفنية
| Model Name | FP1000 / listed as 1000FP |
|---|---|
| Rated Capacity | 1000 VA / 600 W |
| Input Voltage Range | 110/120 V or 220/230/240 V AC, depending on regional version |
| Output Waveform | Simulated sine wave in battery mode |
| Transfer Time | Typical 2–6 ms |
| Battery Configuration | 2 × 12 V / 7 Ah (published FP-series specification) |
| Recharge Time | Approximately 4–6 hours to 90% capacity (published FP-series specification) |
| Output Sockets | 4 (published FP-series specification; verify regional unit) |
| Dimensions | 320 × 130 × 182 mm (published FP-series specification) |
| Weight | 8.2 kg (published FP-series specification) |
| الضمان | 1 Year |
Compatibility and Setup
Choose the correct input-voltage variant for the local mains supply and connect only equipment within the UPS’s rated power capacity. Battery backup time varies with load and battery condition.
Frequently Asked Questions
Is this a 1000 W UPS?
No. The official FP1000 specification is 1000 VA / 600 W, not 1000 W.





المراجعات
لا توجد مراجعات بعد.