HyperX HX440C19PB4A/8 is a 1G x 64-bit (8GB) DDR4-4000 CL19 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles
(Intel® XMP) 2.0. Each module has been tested to run at DDR4-4000 at a low latency timing of 19-23-23 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard
electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.4V to 3.3V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• HyperX Infrared Sync working distance 18mm
• Factory preset RGB wave lighting effect
• Height 1.661” (42.20mm)


Intel Core I5 12400F 4.4Ghz Processor
Samsung Odyssey Ark G97NC S55CG970NU 55 Inch 165Hz 1ms UHD VA Curve 1000R Quantum Matrix FreeSync Premium Pro Cockpit Mode Titan Black Monitor
Gigabyte B760M Gaming WIFI6 PLUS Gen5 LGA1700 Gaming Motherboard
MSI MAG 32C6X 31.5 Inch 250Hz OC 1ms MPRT FHD VA Curve 1500R Adaptive-Sync HDR Ready Black Monitor
Msi GeForce RTX 5070 TI Ventus 3X 16GB GDDR7 OC Graphic Card 






المراجعات
لا توجد مراجعات بعد.