✅ Authorized Xigmatek Partner in Egypt | Official Warranty Coverage | Expert PC Building Consultation Available

⚡ Engineering Highlights at a Glance:

• 8 Pre-Installed ARGB PWM Fans: 6 reverse-blade H22A (white) and 2 standard H22A (white) for airflow and lighting out of the box.
• Single-Piece Curved Tempered Glass: Panoramic view of internal components with a clean, seamless front panel.
• E-ATX Support (≤285mm): Accommodates ATX, M-ATX, and ITX boards, including back-plug motherboard designs.
• 400mm GPU Clearance: Fits flagship graphics cards in horizontal or vertical orientation with the included bracket.
• Dual 360mm Radiator Support: Top and side positions accept 240/280/360mm radiators for AIO or custom loop cooling.
• USB-C Front I/O: 1x USB-C, 2x USB 3.0, and HD Audio for modern connectivity.
• Mesh Top Panel: Vents heat from the top while the glass panels showcase the build.

Verifying Clearances Before Purchase

The Pano II Air Arctic fits CPU coolers up to 165mm tall, PSUs up to 165mm long, and GPUs up to 400mm. Measure your components against these limits before buying. The E-ATX support is capped at 285mm board width; wider E-ATX boards will not fit. Back-plug motherboard compatibility applies to ATX and M-ATX form factors, not E-ATX.

Fan and Radiator Placement

The case supports up to 11 fans total: 3 top (120mm or 2x 140mm), 3 side, 3 bottom, and 2 rear. The 8 included H22A fans are already installed. For optimal airflow, intake from the bottom and side, and exhaust from the top and rear. Radiator support covers top (240/280/360mm), side (240/360mm), and rear (120mm). Side-mounted radiators may interfere with long GPUs depending on thickness and positioning; plan the loop layout before committing to component placement.

📐 ARGB and PWM Control

The included ARGB & PWM control box supports 5V ARGB and 4-pin PWM connections with a remote control. It draws power via SATA. You can also sync to your motherboard’s ARGB header using the MB Sync cable if your board supports 5V 3-pin addressable RGB. The control box has a maximum rating of 40W on the 5V rail and 36W on the 12V rail; do not exceed these limits.

Plan your airflow direction before installing components. The case is designed for bottom and side intake, with top and rear exhaust. The 6 reverse-blade fans are positioned for intake on the side and bottom panels, while the 2 standard fans handle rear exhaust. If you add a top-mounted radiator, configure those fans as exhaust. Route the 24-pin and GPU power cables through the rubber grommets before mounting the radiator, as access becomes tighter once the top is populated. The vertical GPU bracket is included; if you use it, confirm the riser cable length and clearance against your motherboard’s PCIe slot. For ARGB control, decide between the included remote and motherboard sync via the 5V cable. The control box SATA power connector must be plugged in for fan power. Back-plug motherboard support applies to ATX and M-ATX boards; E-ATX boards use traditional front-facing connectors.