Xigmatek Cubi II LCD 9.18 Inch DGT LCD 7 Fan ARGB Type-C Mid Tower Case

✅ Authorized Xigmatek Partner in Egypt | Official 1-Year Warranty | Expert PC Building Consultation Available

⚡ Engineering Highlights at a Glance:

• 9.18-inch Multi-Display LCD: A 1920 x 462 Full HD+ panel that supports Windows 10 and 11 multi-display setups, useful for system monitoring, custom visuals, or secondary screen content.
• 7 Pre-installed ARGB Fans: Three reverse-blade fans on the motherboard panel, three reverse-blade fans on the bottom, and one standard fan at the rear, all pre-installed for out-of-the-box airflow and lighting.
• Panoramic Glass Showcase: The case uses a dual-chamber layout with tempered glass panels on the front and side, giving a clear view of the internal components without a divider column.
• E-ATX Support (up to 280mm): Fits E-ATX boards up to 280mm wide, plus ATX, Micro-ATX, and Mini-ITX, including boards with hidden connectors like ASUS BTF and MSI Project Zero.
• Flexible Radiator Support: Up to 360mm on the top, 360mm on the motherboard panel, and 360mm on the bottom when using a Micro-ATX board.
• 370mm GPU Clearance: Accommodates most high-end graphics cards, with support for vertical GPU installation using a riser cable (sold separately).
• USB-C Front I/O: Includes one USB-C port, two USB 3.0 ports, and an HD audio jack on the top panel for modern connectivity.

LCD Panel and Software

The 9.18-inch LCD panel runs at 1920 x 462 and supports Windows 10 and 11 multi-display setups. Because it functions as an additional display, you connect it to your GPU or motherboard video output and configure it in Windows Display Settings. Plan for an extra display cable and a free video output on your GPU. The panel is not a touchscreen; it is designed for system monitoring, custom wallpapers, or secondary information.

Motherboard and Clearance

The case supports E-ATX boards up to 280mm wide, plus ATX, Micro-ATX, and Mini-ITX. It also supports back-plug motherboards from ASUS (BTF), MSI (Project Zero), and Gigabyte (Project Stealth). Check your motherboard’s width before purchase if you use a true E-ATX board wider than 280mm. The 165mm CPU cooler height accommodates most tower air coolers and AIO pump blocks. GPU length is limited to 370mm, which covers most flagship cards but not the longest models.

Cooling and Radiator Placement

The case ships with seven ARGB fans, so out-of-the-box airflow is strong. Radiator support is flexible: 280mm or 360mm on the top, 360mm on the motherboard panel, and 360mm on the bottom when using a Micro-ATX board. If you plan a custom loop or a large AIO, decide on the radiator placement before installing the motherboard, because the side-mounted radiator shares space with the motherboard panel. The reverse-blade fans on the side and bottom are oriented to pull air into the case while showing their clean face toward the glass.

Plan the LCD connection before you start. The panel acts as an additional display, so you need a free video output on your GPU or motherboard and a cable long enough to reach the case’s top panel. Configure it in Windows Display Settings after the first boot and set it to extend or duplicate your desktop depending on how you plan to use it.

Decide on radiator placement early. If you plan a 360mm AIO on the side (motherboard panel), install the radiator before mounting the motherboard to avoid clearance issues. For a bottom-mounted radiator, use a Micro-ATX board because the bottom 360mm support is limited to M-ATX.

The case supports back-plug motherboards, which can simplify cable management significantly. If you use a standard motherboard, route the 24-pin and CPU cables through the grommets before installing the motherboard, and use the dual-chamber space behind the motherboard tray for excess cable length.

The seven pre-installed ARGB fans handle airflow well, but they use a proprietary connector in some Cubi II models. If you want to sync them with your motherboard’s ARGB software, check whether the included fan controller supports motherboard sync. If not, use the case’s built-in LED control or plan to replace the fans with standard ARGB models for full software control. The 1-year Alfrensia warranty covers manufacturing defects.