✅ Authorized Xigmatek Partner in Egypt | Official Warranty Coverage | Expert PC Building Consultation Available
Xigmatek Sun Arctic 5 Fan Argb PWM White Super Tower Case
Xigmatek Sun Arctic is an E-ATX super tower case in Arctic White, and it ships with 5 pre-installed ARGB PWM fans plus a steel chassis. Because it supports GPUs up to 420mm and CPU coolers up to 175mm, it fits flagship components without interference. In addition, it accepts 360mm top-mounted radiators, uses a standard PS2 ATX power supply, and provides USB 3.0 and USB 2.0 front I/O. Available at Alfrensia for 3,399 EGP.
⚡ Engineering Highlights at a Glance:
- 5 Pre-Installed ARGB PWM Fans: These fans deliver airflow and lighting immediately, and PWM allows the motherboard to control fan speed.
- E-ATX Support (≤285mm): The case fits E-ATX boards when you leave the side fan mount free, and it also supports ATX, M-ATX, and Mini-ITX in all configurations.
- 420mm GPU Clearance: Long triple-fan graphics cards fit without removing drive cages or modifying the chassis.
- 175mm CPU Cooler Clearance: Large dual-tower air coolers fit comfortably inside the case.
- 360mm Radiator Support: The top position accepts 240, 280, or 360mm radiators, so you can install an AIO or custom loop.
- 220mm PSU Clearance: Long modular power supplies fit without pressing against the drive cage or GPU.
- Arctic White Finish: The white coating pairs with white components and ARGB lighting for a unified build appearance.
Built for High-End Gaming and Water Cooling
The top position supports 240mm, 280mm, and 360mm radiators, so it works as the primary mounting point for AIO coolers. In addition, a 120mm radiator can be added at the rear for extra cooling. The case supports up to 8 fans in total: 3 top (120mm or 140mm), 2 on the motherboard side, 2 bottom, and 1 rear. Because GPU clearance reaches 420mm and CPU cooler clearance reaches 175mm, the Sun Arctic accommodates flagship hardware without interference in standard air-cooled configurations.
Airflow and Cooling Options
The Sun Arctic is designed for a positive-pressure airflow setup, so air enters from the bottom and side and exits from the top and rear. Because the case ships with 5 ARGB PWM fans, you get a base airflow configuration right away, and you can add more fans later. The mesh top panel lets heat escape directly, which helps CPU air coolers and top-mounted radiators. For custom water loops, the top 360mm radiator position and rear 120mm mount provide flexibility, although this model does not support front-mounted radiators.
Storage and Expansion
The case includes three drive mounting points: a top HDD cage with 3.5″ and 2.5″ combo mounting, a bottom HDD cage for a single 3.5″ drive, and an SSD bracket for one 2.5″ drive. Because there are 7 standard expansion slots, multi-GPU configurations and add-in cards fit without restriction. Plan drive placement around radiator positioning if you use a top-mounted 360mm radiator, because the top HDD cage may need to be removed for clearance.
Who is the Xigmatek Sun Arctic For?
Expert Advice & Build Considerations
E-ATX Compatibility with Side Fan Installed
E-ATX motherboards up to 285mm wide fit only when the side fan mount stays empty. If you install fans on the motherboard side (2x 120mm), the maximum motherboard width may shrink. Therefore, plan your fan configuration against your board dimensions before ordering.
Radiator Placement and Drive Cage Interference
The top position is the primary radiator mount and supports up to a 360mm radiator. When you install a top radiator, the top HDD cage may need to be removed to clear the radiator and fans. As a result, plan your storage configuration accordingly and decide whether the top HDD cage is required for your build.
📐 Cable Management and Build Order
Install the power supply (up to 220mm) before the GPU, because the PSU sits below the GPU area. Route the 24-pin and GPU power cables through the grommets before you mount a top radiator, since access becomes tighter afterward. Connect the included ARGB PWM fans to motherboard headers or a fan hub: plug PWM cables into 4-pin headers and ARGB cables into 5V 3-pin headers. If your motherboard lacks a 5V 3-pin ARGB header, the fans will spin but their lighting cannot be customized.
المواصفات الفنية
| الموديل | Xigmatek Sun Arctic |
| العلامات التجارية | Xigmatek |
| SKU / MPN | EN49729 |
| EAN | 883371029722 |
| Case Type | E-ATX Super Tower |
| Color | Arctic White |
| Dimensions | 473 x 225 x 485 mm (LxWxH) |
| Material | Steel |
| Motherboard Support | E-ATX (≤285mm with side fan installed), ATX, M-ATX, Mini-ITX |
| Expansion Slots | 7 Standard Slots |
| GPU Length Limit | 420mm |
| CPU Cooler Height | 175mm |
| PSU Length Limit | 220mm (Standard PS2 ATX PSU) |
| Fan Support | Top: 3x120mm or 3x140mm | MB Side: 2x120mm | Bottom: 2x120mm | Rear: 1x120mm |
| Included Fans | 5x ARGB PWM |
| Radiator Support | Top: 240/280/360mm | Side: 120mm |
| Front I/O | USB 3.0 x1, USB 2.0 x1, HD Audio |
| Drive Bays | HDD Cage (Top): 3.5″ & 2.5″ Combo x1 | HDD Cage (Bottom): 3.5″ x1 | SSD Bracket: 2.5″ x1 |
Expert Recommendation: Building in the Xigmatek Sun Arctic
Plan your fan and radiator layout before installing components. The top position is the primary radiator mount (up to 360mm), and it also supports 3x 140mm fans. If you use the side fan mounts (2x 120mm), verify your motherboard width does not exceed the E-ATX limit when side fans are installed. Route the 24-pin and GPU power cables behind the motherboard tray before mounting a top radiator, because access becomes tighter afterward. The case includes 5 ARGB PWM fans; connect their PWM cables to motherboard headers or a fan hub and their ARGB cables to a 5V 3-pin header for lighting control. Install the power supply (up to 220mm) before the GPU if you have a long graphics card, because the PSU area sits below the GPU zone. Confirm GPU length (up to 420mm) against the space between the front panel and the motherboard edge, and check that your cooling plan does not require a front-mounted radiator, since this case supports radiators only in the top and side positions. The Arctic White finish pairs best with white components and white ARGB lighting for a unified build appearance.
Frequently Asked Questions
Does the Xigmatek Sun Arctic include fans?
Yes. The case ships with 5 pre-installed ARGB PWM fans. In addition, you can add more fans in the top, bottom, side, and rear positions up to the supported count.
What is the maximum GPU length supported?
The Xigmatek Sun Arctic supports GPUs up to 420mm in length, so it accommodates most flagship graphics cards currently available.
Can I mount a 360mm radiator in this case?
Yes. The top position supports 240mm, 280mm, and 360mm radiators. In addition, you can mount a 120mm radiator at the side position.
Does the case support E-ATX motherboards?
Yes, the case supports E-ATX motherboards up to 285mm wide, but only when the side fan mount is not in use. With side fans installed, the maximum motherboard width may shrink. ATX, Micro-ATX, and Mini-ITX fit in all configurations.
What is the maximum CPU cooler height?
The Xigmatek Sun Arctic supports CPU coolers up to 175mm tall, so it fits most dual-tower air coolers and 240mm/360mm AIO pump blocks.





















المراجعات
لا توجد مراجعات بعد.