✅ Authorized AULA Partner in Egypt | Official 1-Year Warranty | Expert PC Building Consultation Available
AULA HERO68 HE Dragon King Switch USB Wired 65% 8K Polling Gradient Purple Wired Magnetic Gaming Keyboard
AULA HERO68 HE is a 65% wired magnetic-switch gaming keyboard with 68 keys and Dragon King magnetic switches. It offers adjustable actuation from 0.01 to 3.4mm, an 8000Hz polling rate, and up to a 128K scanning rate. It also features a metal plate, five-layer sound dampening, hot-swap support for compatible magnetic switches, and south-facing per-key RGB with shine-through letters. Available at Alfrensia for 2,449 EGP.
⚡ Engineering Highlights at a Glance:
- 65% Layout (68 Keys): Compact layout that saves desk space while retaining essential keys for gaming and productivity.
- Dragon King Magnetic Switches: Pre-lubed magnetic switches with 28±5gf trigger force, 45±5gf bottom-out, and 3.4±0.1mm total travel.
- Adjustable Actuation 0.01 – 3.4mm: Fine-tune each key’s trigger point for hair-trigger sensitivity or deliberate keystrokes.
- 8000Hz Polling Rate: Reports input up to eight times faster than standard 1000Hz keyboards, reducing input latency.
- 128K Scanning Rate: High-speed scanning registers rapid multi-key inputs with anti-ghosting and N-Key Rollover support.
- Metal Plate with 5-Layer Dampening: Softer, “thocky” typing feel that reduces the clack of typical magnetic keyboards.
- South-Facing RGB with Shine-Through Letters: Per-key RGB with side lighting, fully customizable in color, effect, saturation, brightness, and speed.
Who is the AULA HERO68 HE For?
Expert Advice & Build Considerations
Polling Rate and USB Requirements
The HERO68 HE reaches 8000Hz polling only when connected to a USB 2.0 high-speed hub or a USB 3.0 hub . Plugging it into a slower or shared port may reduce the polling rate. Use the included L-shaped USB-A to USB-C cable and connect it directly to a rear motherboard USB 3.0 port for the most stable performance. Because the keyboard is wired only, plan cable routing for your desk before you set it up.
Magnetic Switch Compatibility
The HERO68 HE uses magnetic switches, and the hot-swap PCB accepts only specific models: TTC King of Magnetic Switch, TTC Uranus Gaming Edition, and AULA’s Meteor, Black King, Dragon King, and Jade King switches . Standard mechanical switches will not work, so check compatibility before swapping. The web driver is Chromium-based and accessible from any browser, which lets you adjust actuation, enable SOCD, and try Mod Tap or Dynamic Keystroke without installing software.
Actuation and Typing Feel
Adjustable actuation ranges from 0.01 to 3.4mm. Shallow settings (0.01-0.5mm) suit fast-paced shooters and rhythm games, while deeper settings (2-3.4mm) reduce accidental presses for typing and strategy titles. The Dragon King switches are the lightest in the lineup at 28gf trigger and 45gf bottom-out, which suits players who prefer low actuation force but may feel too light for heavy-handed typists. The metal plate and five-layer dampening give a softer, more controlled sound than typical magnetic keyboards.
Technical Specifications
| Model Name | AULA HERO 68 HE (Purple Contours) |
| Brand | AULA |
| EAN / UPC | 6978080504197 |
| Product Type | Wired magnetic gaming keyboard |
| Layout | 65% (68 keys) |
| Switches | Dragon King Magnetic, pre-lubed |
| Switch Specifications | 28±5gf trigger | 45±5gf bottom-out | 3.4±0.1mm total travel | 85±15Gs to 480+60Gs magnetic flux |
| Actuation Range | Adjustable 0.01 – 3.4 mm |
| Connectivity | USB wired (USB-C, L-shaped USB-A to USB-C cable) |
| Polling Rate | 8000Hz (requires USB 2.0 high-speed hub or USB 3.0 hub) |
| Scanning Rate | Up to 128K |
| Hot-Swap | Yes, only compatible magnetic switches (TTC King of Magnetic, TTC Uranus, AULA Meteor/Black King/Dragon King/Jade King) |
| Keycaps | Shine-through letters (MDA, OEM, Cherry profiles supported) |
| Backlight | South-facing per-key RGB with side lighting |
| Mounting | Tray-mounted with metal plate and 5-layer dampening |
| Anti-Ghosting | N-Key Rollover with calibration support |
| Features | SOCD (Snap Key), Mod Tap, Dynamic Keystroke via Chromium-based web driver |
| Dimensions | 314 x 120 mm, 18-31 mm height (spacebar to ESC side) |
| Weight | 0.8 kg |
| Color | Purple Contours |
| Included Accessories | USB-C cable | Keycap puller | 2 replacement switches | Wrist strap | User manual |
| Warranty | 1 Year Local Alfrensia Warranty |
Expert Recommendation: Getting the Most from the AULA HERO68 HE
Open the Chromium-based web driver on first use to set actuation per key, enable SOCD, and experiment with Mod Tap and Dynamic Keystroke. No software installation is required, and the settings save to the keyboard for use on other PCs.
Connect the keyboard to a USB 2.0 high-speed hub or a USB 3.0 port to reach the full 8000Hz polling rate. Use the included L-shaped USB-A to USB-C cable and route it behind the desk before setting the keyboard in place.
Start with a shallow actuation (0.5-1.0mm) for shooters and rhythm games, then increase it to 2.0-3.0mm for typing to avoid accidental presses. The Dragon King switches are the lightest magnetic option at 28gf trigger, so adjust actuation and spring feel to match your preferences.
Because the keyboard is wired only, plan cable routing accordingly. The metal plate and five-layer dampening give a controlled sound, but if you swap switches, use only compatible magnetic models—standard mechanical switches will not work. The 1-year Alfrensia warranty covers manufacturing defects.
Frequently Asked Questions
What are magnetic switches, and how do they work?
Magnetic switches use a Hall effect sensor to detect the position of the switch stem without physical contact between the pin and PCB. This allows adjustable actuation from 0.01mm to 3.4mm, eliminates contact bounce, and supports features like SOCD and Dynamic Keystroke. The HERO68 HE uses Dragon King magnetic switches with 28±5gf trigger and 45±5gf bottom-out force .
Does the HERO68 HE support 8000Hz polling?
Yes, but only when connected to a USB 2.0 high-speed hub or a USB 3.0 hub . Plugging it into a slower or shared port may reduce the polling rate. The keyboard also has an up-to-128K scanning rate for fast multi-key input.
What is SOCD, and how does it help in games?
SOCD (Snap Key) resolves conflicting inputs by prioritizing the last key pressed as the sole input. In practice, this means you can press and hold opposing directions and still move cleanly without complex finger movements. SOCD is enabled through the Chromium-based web driver and helps in shooters, fighting games, and other titles that require precise directional input .
Can I swap in standard mechanical switches?
No. The HERO68 HE is only compatible with magnetic switches: TTC King of Magnetic Switch, TTC Uranus Gaming Edition, and AULA’s Meteor, Black King, Dragon King, and Jade King switches . Standard mechanical switches will not work with this PCB.
What is included in the box?
The package includes the AULA HERO68 HE keyboard, a USB-C cable, a keycap puller, two replacement switches, a wrist strap, and a user manual. The keyboard carries a 1-year warranty from Alfrensia.













Reviews
There are no reviews yet.