✅ Authorized Fantech Partner in Egypt | Official Warranty Coverage | Expert PC Building Consultation Available
Fantech Workstation MBD1 Dual Arm Up To 32 Inch Black Wired Monitor Stand
Fantech ProMount MBD1 is a dual-arm monitor bracket featuring a built-in gas piston mechanism, support for 13-32 inch monitors, a 2-9 kg weight capacity, and both C-clamp and grommet mounting options. Its integrated cable management and wide adjustment range allow you to create an ergonomic, clutter-free dual-monitor workspace.
⚡ Engineering Highlights at a Glance:
- Gas Piston Mechanism: Premium built-in gas piston, rigorously tested for strength and long-term stability.
- Dual-Arm Design: Supports two monitors simultaneously for an expanded, productive workspace.
- Wide Monitor Compatibility: Fits screens from 13 to 32 inches with a weight capacity of 2-9 kg per arm.
- Integrated Cable Management: Built-in cable slots keep wires neat and your desk clutter-free.
- Flexible Tilt Adjustment: -60° to +90° tilt range for optimal viewing angles.
- Versatile Mounting: Includes both C-clamp and grommet mounting options for desks 15-80 mm thick.
- Full VESA Support: Compatible with 75×75 mm and 100×100 mm VESA patterns.
Who is the Fantech ProMount MBD1 For?
Expert Advice & Setup Considerations
Gas Piston Mechanism
The MBD1 features a built-in gas piston that assists with height adjustment and holds the monitor securely in place. Unlike spring-based arms that can sag over time, gas pistons are rigorously tested for strength and long-term stability. Adjust the tension screw to match the weight of your monitor if you notice any drift or difficulty in positioning.
📐 Desk Space and Mounting
Before purchase, verify that your desk thickness falls within the supported 15-80 mm range. The MBD1 offers two mounting methods: a C-clamp for easy installation on the desk edge, and a grommet mount for desks with an existing cable hole. Ensure the mounting point is clear of obstructions and that the desk surface can support the weight of both monitors and the arm assembly. The arm span reaches 400-900 mm, so measure your available desk width to confirm the dual-monitor configuration fits.
🔩 VESA and Monitor Compatibility
The MBD1 supports both 75×75 mm and 100×100 mm VESA patterns, covering the vast majority of monitors from 13 to 32 inches. Each arm supports 2-9 kg. Check your monitor’s VESA pattern and weight before installation. If your monitor uses a recessed VESA mount, you may need spacers (not included) to ensure a secure fit. The tilt range of -60° to +90° allows for portrait and landscape orientations.
Technical Specifications
| Model Name | Fantech ProMount MBD1 |
| Brand | Fantech |
| SKU / MPN | MBD1 |
| EAN / UPC | 6977052254580 |
| Color | Black |
| Arm Type | Dual-Arm |
| Life Mechanism | Built-in Gas Piston |
| Monitor Compatibility | 13-32 inches |
| Weight Capacity | 2-9 kg |
| VESA Compatibility | 75×75 mm / 100×100 mm |
| Height Adjustment | 160-460 mm |
| Arm Span | 400-900 mm |
| Tilt Range | -60° to +90° |
| Supported Desk Thickness | 15-80 mm |
| Mounting Options | C-Clamp and Grommet Mount |
| Cable Management | Integrated Cable Slots |
Expert Recommendation: Getting the Most from Your MBD1
Before installation, verify that your desk thickness falls within the 15-80 mm range and that your monitors are VESA-compatible (75×75 mm or 100×100 mm) and weigh between 2-9 kg. For best ergonomics, position the monitors so the top of the screen is at or slightly below eye level, and angle them slightly inward for a natural viewing curve. Use the integrated cable management slots to route display and power cables along the arm, keeping your desk surface clear. If you notice the arm sagging under load, adjust the gas piston tension screw to match your monitor’s weight. When switching between landscape and portrait orientation, loosen the VESA plate screws, rotate the monitor, and retighten securely.
Frequently Asked Questions
What monitors are compatible with the Fantech ProMount MBD1?
The MBD1 supports monitors from 13 to 32 inches with a weight capacity of 2-9 kg per arm. It is compatible with both 75×75 mm and 100×100 mm VESA mounting patterns.
What mounting options does the MBD1 support?
The MBD1 includes both a C-clamp for edge mounting and a grommet mount for desks with an existing cable hole. It supports desk thicknesses from 15 to 80 mm.
How much weight can each arm of the MBD1 hold?
Each arm of the MBD1 supports monitors weighing between 2 kg and 9 kg.
What is the height adjustment range of the MBD1?
The MBD1 offers a height adjustment range of 160-460 mm with an arm span of 400-900 mm, allowing flexible positioning for dual-monitor setups.
Does the MBD1 include cable management?
Yes. The MBD1 features integrated cable slots that keep wires organized and your desk clutter-free.












Reviews
There are no reviews yet.