ID-COOLING FROST X55 Core 2g 16.2 W/m-K Thermal Paste
230 EGP
- Part Number: FROST X55 Core 2g / 6931393308371
- Thermal Performance: 16.2 W/m-K Thermal Conductivity | 0.02℃-cm²/W Thermal Resistance
- Specifications: -50℃ to 250℃ Operating Temperature Range | 2.9 g/cm³ Density | 120 Pas Viscosity
- Design & Build: Grey Color | 2g Net Weight (Syringe)
- Warranty: 6 months
In stock
Price Match Guarantee
ID-COOLING FROST X55 Core
High-Conductivity Thermal Paste · 2g
16.2 W/m-K thermal conductivity. 0.02 ℃-cm²/W thermal resistance. −50 ℃ to 250 ℃ operating range. Grey, 2g syringe.
0.02 ℃-cm²/W
−50 to 250 ℃
2g
0.02 ℃-cm²/W
−50 ℃ to 250 ℃
2.9 g/cm³
Grey
High conductivity. Low thermal resistance.
The FROST X55 Core is a 16.2 W/m-K thermal compound engineered to move heat away from the CPU or GPU die efficiently. Its 0.02 ℃-cm²/W thermal resistance means less impedance between the heat source and the cooler — more of the cooler’s performance actually reaches the die.
With an operating range of −50 ℃ to 250 ℃, the paste stays stable through freezing cold rooms and extreme load temperatures alike. The 2 g syringe provides enough compound for multiple CPU installations.
16.2 W/m-K
0.02 ℃-cm²/W
−50 ℃ to 250 ℃
2.9 g/cm³
2 g · Grey
16.2 W/m-K Thermal Conductivity
High thermal conductivity shortens the path heat takes from die to cooler. In practice, that means lower sustained temperatures under load, more headroom for higher clock speeds, and less fan noise required to hit the same cooling target.
Built for Reliable Heat Transfer
16.2 W/m-K Conductivity
High-conductivity formulation for efficient heat transfer from die to cooler.
0.02 ℃-cm²/W Resistance
Low thermal resistance minimizes the impedance between CPU and heatsink.
Wide Temperature Range
Operates reliably from −50 ℃ up to 250 ℃ — stable in extreme conditions.
Balanced Viscosity
120 Pa·s viscosity spreads smoothly without running — easy to apply.
2 g Syringe
Enough compound for multiple CPU installs — convenient for re-pastes.
Neutral Grey Finish
Grey compound — clean and discreet under the heatsink.
Simple, Clean, Repeatable
Apply a small pea-sized amount to the centre of the CPU heat spreader, then mount your cooler to spread the paste evenly. The 120 Pa·s viscosity is engineered to spread easily and stay in place, reducing the chance of air pockets and dry spots.
Stable from −50 ℃ to 250 ℃
Whether your system idles cold in a cool room or pushes thermal limits under sustained load, the FROST X55 Core stays within its operating range. The paste is designed to keep its thermal performance across many heat cycles without drying out quickly.
What’s in the Box
Grey thermal compound
For spreading the paste (if included)
Technical Specifications
| Model | ID-COOLING FROST X55 Core |
|---|---|
| Thermal Conductivity | 16.2 W/m-K |
| Thermal Resistance | 0.02 ℃-cm²/W |
| Operation Temperature | −50 ℃ to 250 ℃ |
| Density | 2.9 g/cm³ |
| Viscosity | 120 Pa·s |
| Net Weight | 2 g (also available in 4 g) |
| Color | Grey |
| Warranty | 6 Months |
Frequently Asked Questions
How much paste should I apply?
+
Apply a small pea-sized amount (roughly 4–5 mm diameter) to the centre of the CPU heat spreader, then mount your cooler to spread the paste evenly. The 2 g syringe provides enough compound for multiple installations.
Is this paste electrically conductive?
+
The FROST X55 Core is a non-electrically-conductive thermal compound formulated for safe application on CPU and GPU heat spreaders.
How often should I replace the paste?
+
The wide operating range (−50 ℃ to 250 ℃) helps the compound maintain its thermal performance across many heat cycles. For most systems, replacement every 2–4 years is reasonable — sooner if you notice rising CPU temperatures under the same workload.
Can this be used on a GPU or laptop?
+
Yes. The FROST X55 Core is suitable for CPU coolers, GPU coolers, and laptop heatspreaders, as long as the surfaces are properly cleaned before reapplication.
What warranty is included?
+
The ID-COOLING FROST X55 Core is covered by a 6-month warranty against manufacturing defects. Please contact your local retailer for warranty support.
Complete Your Build with Confidence
16.2 W/m-K · 0.02 ℃-cm²/W · −50 ℃ to 250 ℃ · 2g syringe — backed by a 6-month warranty.
✓ 6-Month Warranty
✓ 2g Syringe
| MODEL | |
|---|---|
| Density | |
| Viscosity | |
| Thermal Conductivity | |
| Part Number | |
| Warranty |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.