Xigmatek Cubi M LCD 9.18 Inch DGT LCD 6 Fan ARGB Micro Tower Case

✅ Authorized Xigmatek Partner in Egypt | Official 1-Year Warranty | Expert PC Building Consultation Available

⚡ Engineering Highlights at a Glance:

• 9.18-inch Multi-Display LCD: A 1920 x 462 panel that supports Windows 10 and 11 multi-display setups, useful for system monitoring or secondary screen content.
• 6 Pre-installed ARGB Fans: Pre-installed fans handle airflow out of the box, with support for up to 9 fans total if you add more later.
• Compact Micro Tower: Measures 430 x 277 x 372mm, saving desk space compared to a full mid-tower while still supporting Micro-ATX boards.
• 358mm GPU Clearance: Accommodates most modern graphics cards, including many flagship models.
• 360mm Top Radiator: Supports a 360mm AIO on the top, plus a 240mm on the motherboard panel and a 120mm at the rear.
• 200mm PSU Clearance: Fits standard PS2 ATX power supplies up to 200mm long, leaving room for cable management.
• Panoramic Glass Design: Tempered glass panels on the front and side show off the internal components and the LCD panel.

LCD Panel and Software

The 9.18-inch LCD panel runs at 1920 x 462 and supports Windows 10 and 11 multi-display setups. Because it functions as an additional display, you connect it to your GPU or motherboard video output and configure it in Windows Display Settings. Plan for an extra display cable and a free video output on your GPU. The panel is not a touchscreen; it is designed for system monitoring, custom wallpapers, or secondary information.

Motherboard and Clearance

The case supports Micro-ATX and Mini-ITX motherboards only; it does not fit standard ATX or E-ATX boards. The 165mm CPU cooler height accommodates most tower air coolers and AIO pump blocks. GPU length is limited to 358mm, which covers most flagship cards but not the longest models. PSU length is limited to 200mm, so check your power supply dimensions before purchase.

Cooling and Radiator Placement

The case ships with six ARGB fans, so out-of-the-box airflow is strong. Radiator support is 360mm on the top, 240mm on the motherboard panel, and 120mm at the rear. If you plan a custom loop or a large AIO, decide on the radiator placement before installing the motherboard. The top 360mm support is the best option for a large AIO, but confirm that the radiator thickness and fan configuration do not interfere with tall VRM heatsinks or RAM.

Plan the LCD connection before you start. The panel acts as an additional display, so you need a free video output on your GPU or motherboard and a cable long enough to reach the case’s top panel. Configure it in Windows Display Settings after the first boot and set it to extend or duplicate your desktop depending on how you plan to use it.

Decide on radiator placement early. The top 360mm support is the best option for a large AIO, but confirm that the radiator thickness and fan configuration do not interfere with tall VRM heatsinks or RAM. If you use the side 240mm mount, install the radiator before mounting the motherboard to avoid clearance issues.

The case supports Micro-ATX and Mini-ITX boards only, so plan your motherboard choice accordingly. Route the 24-pin and CPU cables through the grommets before installing the motherboard, and use the space behind the motherboard tray for excess cable length.

The six pre-installed ARGB fans handle airflow well, but check whether the included fan controller supports motherboard sync if you want to control the lighting through your motherboard’s software. If not, use the case’s built-in LED control. The 1-year Alfrensia warranty covers manufacturing defects.