✅ Authorized AULA Partner in Egypt | Official Warranty Coverage | Expert PC Building Consultation Available

⚡ Engineering Highlights at a Glance:

• 1.14″ TFT Smart Display: Shows connection mode, battery level, date/time, and volume. In addition, you can upload custom GIF images through the driver software [citation:8].
• Multi-Function Rotary Knob: Controls volume, connection mode switching, and screen navigation. The knob also works as a push-button for menu confirmation [citation:4].
• Tri-Mode Connectivity: Bluetooth 5.0, 2.4GHz wireless, and USB-C wired. The 2.4GHz and wired modes use a 1000Hz polling rate for responsive input [citation:1][citation:4].
• 8000mAh Battery: Large rechargeable battery delivers up to 76 hours of continuous use with the screen at full brightness [citation:1][citation:4].
• Gasket Mount with Five-Layer Dampening: PO sandwich foam, PO switch pad, PET sound-enhancement pad, PO bottom foam, and bottom silicone reduce cavity noise for a softer, quieter keystroke [citation:4].
• Hot-Swappable Sockets: Compatible with both 3-pin and 5-pin mechanical switches. The board ships with pre-lubed linear Reaper switches [citation:8].
• PBT Double-Shot Keycaps: Cherry profile keycaps resist shine and wear better than ABS alternatives [citation:4].

Driver Requires Windows and Wired Mode

Custom GIF uploads, macro programming, and date/time calibration require the AULA driver software. The driver only supports Windows systems and requires a wired USB-C connection [citation:8][citation:10]. Basic functions such as volume control, lighting mode cycling, and connection switching work without software.

2.4GHz Receiver Placement Affects Stability

AULA recommends connecting the 2.4GHz receiver to a USB 2.0 port away from other wireless receivers and metal hubs [citation:6]. If the connection feels unstable, re-pair the receiver by switching to 2.4G mode, holding FN + ~ for three seconds, then reinserting the receiver [citation:3].

📐 Charging and Battery Care

Use the included USB-C cable and connect to a computer for charging. Do not use fast-charging adapters, because they may cause irreversible damage to the keyboard’s charging circuit [citation:6]. To extend battery life, lower the backlight brightness or turn off lighting effects when running wirelessly.

Before using the keyboard wirelessly, charge it fully using the included USB-C cable connected to a computer. Avoid fast-charging adapters, because they may damage the charging circuit [citation:6]. For gaming, switch to 2.4GHz mode with the included receiver for the lowest latency. Use Bluetooth mode for tablets and phones, where the 125Hz polling rate is sufficient and battery life is longer. To customize the TFT display with GIF images, connect via USB-C and use the AULA driver on a Windows system [citation:8]. The knob defaults to volume control; press FN + knob to cycle through lighting adjustment, language, and mode switching. If you plan to swap switches, the hot-swap sockets accept both 3-pin and 5-pin types. Because the keyboard is full-size, ensure your desk has enough room for the 44.5cm width. Use the two-stage kickstand to adjust the typing angle for comfort during long sessions [citation:5].