Thermal Grizzly Kryonaut Extreme 6g Thermal Paste
1899 EGP
- Part Number: TG-KE-006-R
- Type & Size: Extreme Overclocking Thermal Paste | 6g Syringe | Pink
- Conductivity: Maximum Thermal Conductivity | Aluminum Oxide Nano Particles | Electrically Non-Conductive (0 pS/m) | No Curing
- Key Traits: Optimized for Liquid Nitrogen / Cryogenic Overclocking | Also Works in Water Cooling | Density 3.76 g/cm³ | Viscosity 130–180 Pa·s
- Included: 1x Kryonaut Extreme 6g | 2x Applicator | 1x Manual | 1x Certificate of Origin
- Warranty: 1 Year
In stock
Price Match Guarantee✅ Authorized Thermal Grizzly Partner in Egypt | Official Warranty Coverage | Expert PC Building Consultation Available
Thermal Grizzly Kryonaut Extreme 6g Thermal Paste
Thermal Grizzly Kryonaut Extreme is an ultra-high performance thermal paste developed for extreme overclocking, including liquid nitrogen cooling, as well as water cooling and ambient applications. Because it uses the smallest particle size and a thinner minimum layer height, it achieves maximum thermal conductivity and improved low-temperature resilience. The paste is electrically non-conductive, does not cure, and maintains long-term durability. This is the 6g pink syringe, which ships with two applicators, a manual, and a certificate of origin. Available at Alfrensia for 1,899 EGP.
⚡ Engineering Highlights at a Glance:
- Designed for Extreme Overclocking: Works in cryogenic environments such as liquid nitrogen cooling, where most pastes fail.
- Maximum Thermal Conductivity: Achieved through the smallest particle size and thinner minimum layer height.
- Improved Low-Temperature Resilience: Maintains performance in sub-zero conditions used in extreme overclocking.
- Electrically Non-Conductive: Aluminum oxide nanoparticles do not conduct electricity, so the paste is safe near exposed contacts.
- No Curing: The paste does not harden or cure, so it stays effective over time.
- Long-Term Durability: Maintains thermal transfer performance across many thermal cycles.
- Works in Ambient and Extreme Setups: Developed in cooperation with leading engineers and pro-overclockers to perform well in both water cooling and liquid nitrogen applications.
Optimal Conductivity Under Extreme Conditions
Kryonaut Extreme is based on the well-known Kryonaut paste, but it is refined for extreme conditions. Because the paste uses the smallest possible particle size, it fills microscopic gaps between the CPU heat spreader and the cooler with very little resistance. The thinner minimum layer height also means the paste can be spread more thinly, which reduces thermal resistance further. These changes give the paste maximum thermal conductivity, even when the CPU runs at sub-zero temperatures during liquid nitrogen overclocking. In addition, additional electrically non-conductive aluminum oxide nanoparticles improve the paste’s stability and safety.
Co-Developed with Pro Overclockers
Thermal Grizzly developed Kryonaut Extreme in cooperation with leading engineers and professional overclockers. Because these users push hardware to the limit, the paste needed to perform under conditions that ordinary pastes cannot handle. The result is a paste that works in ambient applications such as water cooling and air cooling, as well as in extreme overclocking scenarios such as liquid nitrogen. This dual-purpose design means the same paste works for everyday gaming builds and for record-breaking overclocking attempts.
Technical Data and Safety
Kryonaut Extreme has a density of 3.76 g/cm³ and a viscosity between 130 and 180 Pa·s. Its electrical conductivity is 0 pS/m, which means it is electrically non-conductive and safe to use near exposed contacts and small surface-mount components. The paste is pink in color, which distinguishes it from standard Kryonaut and makes it easy to identify during application. Because the paste does not cure, it stays pliable and effective over time, and it does not need to be reapplied unless the cooler is removed for maintenance or upgrades.
Available Sizes and Scope of Delivery
Kryonaut Extreme is available in three sizes: 2g, 6g, and a 9ml jar. This listing is the 6g size, which provides enough paste for multiple CPU or GPU installations. The scope of delivery includes one Kryonaut Extreme 6g syringe, two applicators, one manual, and one certificate of origin. The two applicators let you choose the tip that best fits your application method. The certificate of origin confirms the product’s authenticity and origin, which is useful for professional overclockers and users who value traceability.
Product Gallery
Application Guide: How to Apply Kryonaut Extreme
Proper application is just as important as paste quality. Before you start, power off your PC and unplug it. Remove the old cooler and clean both the CPU heat spreader and the cooler base with isopropyl alcohol (90% or higher) and a lint-free cloth. Let the surfaces dry completely before applying new paste. For Kryonaut Extreme, the thinner the layer, the better the performance, so use the applicator to apply a small amount in the center of the heat spreader and spread it into a very thin, even layer using a plastic card or the TG Spatula. Mount the cooler and tighten the screws in a diagonal pattern, one turn at a time, to ensure even pressure.
Who is Thermal Grizzly Kryonaut Extreme For?
Expert Advice and Safety Notes
Handling and Storage
Store the syringe at room temperature and keep the cap on when not in use. Do not heat the syringe directly or expose it to open flame. Keep the paste away from children and pets, and avoid contact with eyes or skin. If you get paste on your skin, wash with soap and water.
Apply Thin for Best Results
Kryonaut Extreme works best in a very thin layer. Because the particle size is very small and the minimum layer height is thin, using too much paste reduces performance. Apply a small amount in the center of the heat spreader and spread it thinly with the included applicator or a plastic card.
⚠️ Disclaimer
Thermal paste application involves handling delicate electronic components. If you are not comfortable disassembling your PC or GPU, have a qualified technician perform the service. Alfrensia is not responsible for damage caused by improper installation or handling. Always follow the instructions provided by your cooler or GPU manufacturer, as some manufacturers void warranties if the cooler is removed.
Technical Specifications
| Model | Kryonaut Extreme |
| Brand | Thermal Grizzly |
| SKU / MPN | TG-KE-006-R |
| EAN | 4260711992896 |
| Content | 6 g |
| Color | Pink |
| Density | 3.76 g/cm³ |
| Viscosity | 130 – 180 Pa·s |
| Electrical Conductivity | 0 pS/m (Electrically Non-Conductive) |
| Curing | No Curing |
| Thermal Conductivity | Maximum (high-performance) |
| Long-Term Durability | Yes |
| Included Tools | 2x Applicator, 1x Manual, 1x Certificate of Origin |
| Recommended Use | Extreme overclocking (LN2), water cooling, ambient cooling |
Expert Recommendation: When to Choose Kryonaut Extreme
Kryonaut Extreme is the right choice when you need the absolute maximum thermal conductivity from a paste. If you are pushing a CPU or GPU to its limits on liquid nitrogen, this paste is designed for those conditions. If you are running a high-end water-cooled or AIO build and want the best possible temperatures, Kryonaut Extreme also performs well in ambient conditions. Because it is electrically non-conductive and does not cure, it is safe for long-term use in any system. If you are applying paste for the first time, use the included applicator and spread the paste into a very thin layer, since Kryonaut Extreme works best with minimal thickness. For standard builds where cost matters more than the last degree or two of temperature, the standard Kryonaut or Hydronaut may offer better value.
Frequently Asked Questions
What makes Kryonaut Extreme different from standard Kryonaut?
Kryonaut Extreme uses the smallest particle size and a thinner minimum layer height, which achieves maximum thermal conductivity. It also adds improved low-temperature resilience, so it performs well in sub-zero conditions used for extreme overclocking with liquid nitrogen.
Is Kryonaut Extreme electrically conductive?
No. Kryonaut Extreme is electrically non-conductive with a conductivity of 0 pS/m, so it is safe to use near exposed contacts and small surface-mount components without risking a short circuit.
Can I use Kryonaut Extreme with air or AIO cooling?
Yes. Kryonaut Extreme was developed in cooperation with engineers and pro-overclockers to work in ambient applications such as water cooling and air cooling, as well as extreme overclocking. It performs well in any cooling setup.
How much thermal paste should I apply?
Kryonaut Extreme works best in a very thin layer. Apply a small amount in the center of the heat spreader and spread it thinly using the included applicator or a plastic card. Using too much paste reduces performance because a thick layer acts as an insulator.
Does the 6g syringe come with application tools?
Yes. The 6g syringe includes two applicators, one manual, and one certificate of origin. The certificate confirms the product’s authenticity and origin.
| MODEL | |
|---|---|
| Density | |
| Viscosity | |
| Part Number | |
| Warranty |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.